MSI MS-98L2 Manual page 42

BIOS Setup
► Super IO Configuration
► Serial Port 1/ 2/ 3/ 4/ 5 /6
This setting enables/disables the specified serial port.
► Change Settings
This setting is used to change the address & IRQ settings of the specified
serial port.
► Mode Select
Select an operation mode for Serial Port 1.
► Parallel Port
This setting enables/disables the parallel port.
► Change Settings
This setting is used to change the address & IRQ settings of the parallel
port.
► Device Mode
Select an operation mode for the parallel port.
► Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that generates
a reset when the software that it monitors does not respond as expected each
time the watch dog polls it.
► FIFO Mode
This setting controls the FIFO data transfer mode.
► Shared IRQ Mode
This setting provides the system with the ability to share interrupts among its
serial ports.
3-8