Sony UP-DR100 Instructions For Use Manual page 17

4
Look at the printout of Group A to determine the
best gray balance from this group.
5
Next, look at the printout of Group B to determine
the best gray balance from this group, too.
6
Press the CALIBRATION button.
The ONLINE indicator goes off and the printer is
switched to off-line.
7
Press the F and f buttons to select GRAY ADJUST
[A].
The printer enters the gray balance adjustment
mode.
F f
Press and
ADJUST [A].
8
Press the G and g buttons to display the pattern
number determined in step 4.
For example, select 18 if you determined that
pattern No. 18 in the sample provides the best gray
balance.
G g
Press and to display 18.
9
Press the F and f buttons to select GRAY ADJUST
[B].
The printer enters the gray balance adjustment
mode.
F f
Press and to display GRAY
ADJUST [B].
to display GRAY
10
Press the G and g buttons to display the pattern
number determined in step 5.
For example, select 39 if you determined that
pattern No. 39 in the sample provides the best gray
balance.
G g
Press and to display 39.
11
Press the CALIBRATION button.
The printer returns to the on-line mode, and the
ONLINE indicator lights.
17
Adjusting Gray Balance