Paper Tray Settings; Tray Settings - Sharp MX-B400P Operation Manual

Paper Tray Settings

Paper tray and paper type settings are explained in this section. Select the [Paper Tray Settings] key to configure the
settings.

Tray Settings

These settings specify the paper type, paper size, and functions allowed for each paper tray.
When the [Tray Settings] key is selected, a list appears showing the trays and the current settings.
Settings of each tray
Select the [Change] key in the above screen to change the settings.
The following settings can be configured.
Item
Type
Size
Approving Feeding
• If the paper size specified here is different from the size of paper that is loaded in a tray, a problem or misfeed may result
when printing.
To change the paper size in a tray, see "1. BEFORE USING THE MACHINE".
• Paper properties such as "Fixed Paper Side" are automatically set when the paper type is selected. The paper tray
properties cannot be changed in this screen.
• If "Disabling of Tray
the tray settings (except for the bypass tray) cannot be configured.
Select the type of paper that is loaded in the tray.
The paper types that can be selected vary by paper tray. For more information, see
"Tray Settings" (page 3-14).
To store a new paper type, see
Select the paper size from the list. The paper sizes that can be selected vary by tray.
The sizes that can be selected may also be restricted by the paper type selected
above. For more information, see
If the desired size does not appear in the list, select [Custom Size] and directly enter
the size (only for the bypass tray). For more information, see
3-14).
Select whether or not printing is allowed using the specified tray.
Settings" (page 3-54) has been enabled in the system settings (administrator) in the Web page menu,
BACK OK
Description
"Paper Type
"Tray Settings" (page 3-14).
3-13
SYSTEM SETTINGS
OPERATION PANEL (GENERAL)
Registration" (page 3-15).
"Tray Settings" (page