Installing The Printer Driver - Sony DPP-EX50 Operating Instructions Manual

Installing the printer driver

1
Make sure that the printer is
disconnected from the
computer.
Note
If you connect the printer to your PC in
this stage, either of the following dialog
boxes are displayed:
• When using Windows 98SE/Me:
Add New Hardware Wizard
• When using Windows 2000/XP:
Found New Hardware Wizard
If this occurs, disconnect the printer
from the PC and then click "Cancel" in
the dialog box.
2
Turn on your computer and
start Windows.
• When installing or uninstalling
the software in Windows
Professional, log on to Windows
as "Administrator" or "Power
user".
• When installing or uninstalling
the software with Windows
Professional/Home Edition, log
on using a "Computer
administrator" user account.
Notes
• Be sure to close all running
• The dialog boxes in this section are
3
Insert the supplied CD-ROM
into the CD-ROM drive of your
computer.
The setup starts automatically and
the installation window is
displayed.
Note
In case the installation window is not
automatically displayed, double-click
the "Setup.exe" of the CD-ROM.
4
Click "Installing Printer
® 2000
Driver."
® XP
The "Sony DPP-EX50 - InstallShield
Wizard" dialog box appears.
programs before installing the
software.
those in Windows XP Professional,
unless otherwise specified. The
installation procedures and the
dialog boxes shown differ
depending on the operating system.
Continued
GB
87