Sony DPP-EX50 Operating Instructions Manual page 107

Check
Symptom
• Is the previewed image
In the EDIT
menu, there are
blank areas at the
top and bottom
of the previewed
image.
• Is a PictBridge-compliant
The "PictBridge"
indication turns on
even after INPUT
SELECT is pressed
to select "Memory
Stick" or
"CompactFlash"
mode.
Printing
Check
Symptom
• Is the print paper properly
Paper does not
feed.
extremely stretched
vertically or horizontally.
digital camera connected to
the printer?
set in the paper tray?
Cause/Solutions
c If an image is extremely stretched
vertically or horizontally, blank areas
may appear in the EDIT menu.
c The standard aspect ratio of an image
shot with a digital camera is 3:4. When
an image is edited or printed in the
postcard or 3.5 x 5 inch size, it is saved as
a more horizontal print image and its top
and bottom edges will be cut and
displayed in black.
c As long as the PictBridge-compliant
device is connected to your computer,
the "PictBridge" indication remains.
Disconnect the cable of the PictBridge-
compliant device to turn off the
indication. (.page 81)
Cause/Solutions
c If print paper is not properly loaded, the
printer may develop trouble. Check the
following:
• Is the correct set of print paper and
print cartridge loaded? (.page 12)
• Does the arrow on the reverse side of
the print paper point in the same
direction as the arrow in the tray?
(.page 16)
• Did you place print paper exceeding
the limit in the paper tray? (.page
16)
• Does the spacer of the tray match the
print paper? (.page 15)
• Did you riffle the print paper
thoroughly?
• Did you bend or fold the print paper
before printing?
GB
107