Troubleshooting - Bissell 7340 User Manual

S
toring The Flip-It
Your Flip It can be stored Ready-to-Use, by leav-
ing water and formula in the unit. Be sure to
remove wet Gentle Clean™ Pad before storing.
T
roubleshooting
Water & Formula are draining out from the clean tank.
Possible Causes
1. Clean Tank Black Cap & Valve are not on tight
2. Clean Tank Black Cap & Valve are cross threaded
No suction
Possible Causes
1. Filter may be dirty or clogged
2. Wet vacuum nozzle may not be on properly
3. Tank is full
4. Filter is wet
5. Something is caught and clogging the air path
Water is not flowing
Possible Causes
1. Clean Tank is not inserted properly
10
w w w . b i s s e l l . c o m
ug603-6704_5200_306.indd 10 ug603-6704_5200_306.indd 10
Tip:
If the Pleated Filter is rinsed
with warm water to clean,
it is recommended to leave
it out of the unit to air dry
before placing it back in
the unit.
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.
Remedies
1. Remove Black Cap & Value
and attach tightly
2. Remove Black Cap & Valve
and make sure it is screwed on
straight and tightly
Remedies
1. Remove filter from the Dirty
Tank and clean
2. Make sure Wet Vacuum Nozzle is
on tight and snapped into place
3. Empty Tank
4. Make sure filter is completely dry
before placing back into the unit
5. Unplug unit. Remove Wet Clean
Nozzle and insert a blunt object
into the air path to remove any
.
potential clog
Remedies
1. Remove Tank and reinsert into
the unit
8 0 0 . 2 3 7 . 7 6 9 1
3/1/06 11:29:04 AM 3/1/06 11:29:04 AM
.