Troubleshooting; Please Do Not Return This Product To The Store - Bissell 7100 Series User Manual

T
roubleshooting
Vacuum cleaner won't run
Possible causes
1. Vacuum cleaner is not plugged in
2. Household fuse/circuit breaker
Decreasing suction or no suction
Possible causes
1. Floor nozzle, flexible hose, or extension wand is blocked 1. Remove each part and check for blockages
2. Filters are dirty
3. Dust bag is full
4. Crack or hole in flexible hose
5. Hose is clogged
6. Air flow regulator or variable suction control
is on low suction setting
Cord does not rewind fully
Possible causes
1. Cord may be twisted or wound unevenly
Other maintenance or service not included in the manual should be performed by an
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of service.
w w w . b i s s e l l . c o m
ug110-4001_7100_507.indd 9 ug110-4001_7100_507.indd 9
WARNING:
To reduce the risk of electric shock,
turn power OFF and disconnect
polarized plug from electrical outlet
before performing maintenance or

troubleshooting.

authorized service representative.
Contact us directly at 1-800-237-7691.
Remedies
1. Check electrical plug
2. Check/replace fuse or circuit breaker
Remedies
2. Check both filters and clean or replace
as needed
3. Replace with new dust bag
4. Check hose and replace if needed
5. Remove hose, check for a clog and clear
6. Check for correct setting
Remedies
1. Gently pull the cord out and rewind
8 0 0 . 2 3 7 . 7 6 9 1
5/22/07 5:01:22 PM 5/22/07 5:01:22 PM
9