Lexmark E330 Technical Instructions page 2

2
Step 5
Remove the "E" clip that holds
the developer roller drive gear.
(See Photo 5)
Photo 5
Step 6
Using a small flat-blade screw-
driver, lift up the locking clip that
holds the drive gear to the
developer roller axle. Remove
the gear. (See Photos 6)
Photo 6
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Lexmark E232/330/332 Technical Instructions
Step 7
Rotate the cartridge 180°. Remove the
developer roller contact from the side of
the cartridge. (See Photos 7)
Step 8
Rotate the developer roller contact bush-
ing from its starting position (See Photo 8)
up (counter clock-wise) toward the top of
the cartridge.
(See Photo 9)
Step 9
Slide the contact bushing off the developer
roller axle.
(See Photo 10)
Step 10
While holding the shaft of the developer
roller, lift the roller out from the hopper
and slide the developer roller axle out from
the toner hopper end plate.
(See Photo 11)