Checking Of Connections - Yamaha YP125E 2003 Service Information

IMPORTANT INFORMATION
EB801000

CHECKING OF CONNECTIONS

Dealing with stains, rust, moisture, etc. on the
connector.
1. Disconnect:
• Connector
2. Dry each terminal with an air blower.
3. Connect and disconnect the connector two or
three times.
4. Pull the lead to check that it will not come off.
5. If the terminal comes off, bend up the pin
and reinsert the terminal into the connector.
6. Connect:
• Connector
NOTE:
The two connectors "click" together.
7. Check for continuity with a tester.
NOTE:
• If there is no continuity, clean the terminals.
• Be sure to perform the steps 1 to 7 listed
above when checking the wireharness.
• For a field remedy, use a contact revitalizer
available on the market.
• Use the tester on the connector as shown.
4
GEN
INFO