Special Tools - Yamaha YP125E 2003 Service Information

EB102000

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly.
Use only the appropriate special tools; this will help prevent damage caused by the use of inap-
propriate tools or improvised techniques.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
90793-80009 Engine tachometer
This tools is needed for detecting
engine rpm.
90890-01083 Weight
-01084 Rocker arm shaft puller bolt
These tools are used when removing
or installing the rocker arm shafts.
90890-01189 Rotor holding tool
This tools is used to remove the
flywheel magneto.
90890-01235 Flywheel puller
This tools is used for removing the
rotor
90890-01268 Ringnut wrench
This tool is used to loosen and tighten
the exhaust pipe.
90890-01311 Valve adjusting tool
This tools is necessary for adjusting
valve clearance.
90890-01312 Fuel level gauge
This gauge is used to measure the fuel
level in the float chamber.
90890-01325 Radiator cap tester
-01352 Adaptor
These tools are used for checking
the cooling system.
90890-01326 T-handle
-01294 Damper rod holder
These tool are used for holding the
damper rod holder when removing or
installing the damper rod holder.
SPECIAL TOOLS
Tool name/Usage
6
GEN
INFO
Illustration