Selective Ring - Panasonic KX-TG2871CN Operating Instructions Manual

ENG_TG2871CN.book 35 ページ ２００６年５月１日 月曜日 午前１１時３３分
3
Press {1} - {9} to select the desired
group.
L You can select the group by pressing
{<} or {>}.
4
Press { 选择 } ({F1} key).
5
Press {<} or {>} repeatedly to select
the desired setting.
6
Press { 选择 } ({F1} key).
L If you selected "未设定", go to step 9.
7
Press {1} - {5} to select the tone.
Press {1} - {4} to select the melody.
L You can select the setting by pressing
{<} or {>}.
8
Press { 保存 } ({F1} key).
9
Press { 关闭 }.
Selective ring/call rejection
(Blacklist)
This feature make you reject the call which
you do not want to receive (Blacklist). You
can also select the called unit when the
designated caller make a call. You can
activate this feature for up to 10 phone
number.
"黑名单": When the designated caller
makes a call, the units do not ring. The
phone number will be displayed on the
base unit display for a few seconds. You
cannot answer the call.
"来电指定": When the designated caller
makes a call, only the selected unit rings
and you can answer the call using the unit.
When a call is receiving, the phone
number will be displayed on the selected
unit and the base unit display will light.
Caller ID Service
Important
L For call waiting service users:
When you receive a call while on the
call, this feature does not work.
Note:
L The rejected call is logged as a missed
call in the caller list.
L The rejected caller is charged for the
call.
To store an item
1
Press { 菜单 } ({F1} key) .
2
Press {#}{1}{3}{6}.
3
Select " 开 " by pressing {<} or {>}.
4
Press { 保存 } ({F1} key).
5
Press {V} or {^} repeatedly to display
the vacant item number.
6
Enter the phone number (from 5 digits
to 22 digits).
7
Press { 保存 } ({F1} key).
8
Press {<} or {>} repeatedly to select
the desired setting.
9
Press { 保存 } ({F1} key).
L To add other items, repeat from step
5.
10
Press { 关闭 }.
To edit a stored item
1
Press { 菜单 } ({F1} key) .
2
Press {#}{1}{3}{6}.
3
Select " 开 " by pressing {<} or {>}.
35