System Architecture; Team Can 1; Team Connector - Bosch IMSA Prototype Classes Scrutineering System Manual

Bosch Motorsport

4 System Architecture

4.1 Team CAN

Team Connector

4.1.1
The pinout of the Team Connector is shown in the table. No changes are allowed to
this arrangement. Termination of the CAN busses must be done in the car's loom as
depicted in 4.1.2 and 4.1.3.
Team Harness Connector: AS(0/1)08-35SN
Scrutineering Harness Connector:
Connector AS608-35PN
Pin

Team CAN 1

4.1.2
IMSA Prototype Class Scrutineering Logger
Description
1 CAN1_H
2 CAN1_L
3 CAN2_H
4 CAN2_L
5 Driver ID Signal
6 Driver ID GND
4 | System Architecture
15 / 47