3 | Components
14 / 47
3.3.8
Fuel Flow Meter
Functional Description: CAN based fuel flow meter for IMSA Prototype Class
Scrutineering System
Mounting Note:
This device in an IMSA approved location. See IMSA tech bulletin for
mounting information.
Temperature Range: 0 to 85 °C
3.4
Sensor Declaration Form
Prior to each event weekend, a Sensor Declaration Form must be submitted via
the IMSA TIMS system.
3.5
Component Seals
All Scrutineering system primary components (DDU9, PBX90, and LT4) units must
have an IMSA Scrutineering Seal. Each device ordered through Bosch Motorsport
NA using the attached order form will be delivered with the seal in place. This seal
is not to be removed or transferred.
IMSA Prototype Class Scrutineering Logger
Bosch Motorsport