Table of Contents
Advertisement
PRODUCT MANUAL
4.3
Unpacking and Inspection
Carefully open the packaging and remove the product. Visually inspect the unit for evidence of physical
damage during shipment. Retain the packing materials and all documentation received with the unit.
Verify that all components on the packing list have been received.
If the unit has been damaged during shipment, contact Alto. A claim must be filed immediately after
unpacking. Alto will assign a RMA Number (Returned Material Authorization) and give instructions for
shipment. Please use the original carton and packing materials for return shipping.
4.4
Mounting Considerations
Allow sufficient room to connect and disconnect the wiring harness.
The Bluetooth Audio Interface is designed to be mounted in any suitable orientation. The unit is
designed to connect to devices in the cabin via radio waves, therefore it is important to mount the unit
as close as possible to the passenger area. Also, care should be taken to insure that the unit is not
shielded or enclosed behind metal panels. This includes metal skinned or mesh honeycomb panels.
Wireless Bluetooth
Audio Stream
Figure 10: Avoid mounting the Bluetooth Audio Interface behind metal skinned or mesh honeycomb
A V I A T I O N
panels
Size
Doc Type
Drawing Number
A
PM
107840-XXXX-XXXXXPM
107840 Bluetooth Audio Interface
Rev
Date
3
04/11/19
Page
18
of
25
Hide quick links:
Advertisement
Table of Contents
