Making Measurements - Fluke 1507 User Manual

Table 7. Power-Up Options
Button
switch position turns on all LCD
segments.
 switch position displays the software

version number.
 switch position displays the model
number.
Starts the Calibration mode. The Tester
 displays  and enters Calibration mode
when the button is released.
Power Up options are active when the button is
pressed.
Shop for Fluke products online at:
Description
Note
MyFlukeStore
www.

Making Measurements

The figures on the following pages show how to make
measurements.
When connecting the test leads to the circuit or device,
connect the common (COM) test lead before connecting
the live lead; when removing the test leads, remove the
live lead before removing the common test lead.
XW Warning
To avoid electric shock, injury, or damage to
the Tester, disconnect circuit power and
discharge all high-voltage capacitors before
testing.
1.800.561.8187
.ca
Insulation Testers
Making Measurements
11