Table of Contents
Advertisement
2.1.3
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Download the latest BIOS file from the ASUS website at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the floppy disk or the USB flash disk that contains the latest BIOS file to the
floppy disk drive or a USB port, then launch EZ Flash 2 in either of these two ways:
•
Press <Alt> + <F2> during POST to display the following:
ASUSTek EZ Flash 2 BIOS ROM Utility V3.24
FLASH TYPE:
Current ROM
BOARD:
P5QL
VER:
0304 (H:00 B:00)
DATE:
09/01/2008
PATH: A:\
A:
Note
[Enter] Select or Load [Tab] Switch
[Up/Down/Home/End] Move
•
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
2.
Press <Tab> to locate the correct BIOS file. Press <Enter>.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
• Only a USB flash disk with FAT 32/16 format and single partition supports the ASUS EZ
Flash 2 utility.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
ASUS P5QL
MXIC 25L8005
[B] Backup
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[V] Drive Info
[ESC] Exit
2-3
Hide quick links:
Advertisement
Table of Contents
