Asus P5QL Manual page 36

10. USB connectors (10-1 pin USB78, USB910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P5QL USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so damages the motherboard!
The USB module is purchased separately.
11. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
P5QL ATX power connectors
1-26
P5QL
P5QL
USB1112 USB78
PIN 1 PIN 1
ATX12V EATXPWR
+3 Volts
-12 Volts
GND
PSPN#
GND
GND
PIN 1
GND
-5 Volts
+5 Volts
+5 Volts
+5 Volts
GND
USB910
PIN 1
PIN 1
+3 Volts
+3 Volts
GND
+5 Volts
GND
+5 Volts
GND
Power OK
+5V Staudby
+12 Volts
+12 Volts
+3 Volts
Chapter 1: Product introduction