Sanyo P50842-00 Troubleshooting Manual page 15

MECHANICAL DISASSEMBLY (Continued)
BUTTON UNITED REMOVAL
Remove 2 screws (B:3x10) to take the button unit off.
MOUNTING WALL REMOVAL
Remove 2 screws (G) to take the mounting wall off.
ATTENTION
– Confirm Mounting wall wire is installed
when you install the back cabinet.
Many solid-state devices (especially Integrated Circuits) are Electrostatically Sensitive,
and, therefore, require special handling techniques as described under "Servicing
Electrostatically Sensitive Devices," on page two in this service literature.
ELECTROSTATICALLY SENSITIVE DEVICES
– 8 –