First Time Setup Procedure
When a new controller is first powered on, the screen will display the first time setup message. The HE
Controller is designed to simplify the setup and installation process by making some default recommenda-
tions during the initial setup. These default settings are appropriate for most common installations.
After completing the plumbing connections to the water softener, turn on and program the HE Controller.
FIRST TIME SETUP
PRESS DOWN ARROW
Serial Number
S/N: 00000123
Firmware Version
FWR***LT21
MON DD YEAR
Set Month (Jan–Dec)
SET MONTH
>JAN
Set Day (0–31)
SET DAY
>1
Set Year (2009–2030)
SET YEAR
>2013
When a new controller is first turned on, the screen displays FIRST TIME
SETUP. Press
to display the first setup screen.
The screen displays the serial number for this Smart Controller. Press
to display the firmware version information screen.
NOTE
If this unit will be installed with a modem, it is
required that this electronic ID number be reported
to Culligan on the IQR form.
The screen displays the firmware version and date installed for this Smart
Controller. Press
to display the month setup screen.
The screen displays the month setting. Press
displayed (and view the next setting), or press
Press
to accept the selected month and advance to the next setting,
SET DAY.
The screen displays the day setting. Press
displayed (and view the next setup screen), or press
setting.
Press
to see the next available value. Press
day and advance to the next setting, SET YEAR.
The screen displays the year setting. Press
displayed (and view the next setup screen), or press
setting.
Press
to see the next available value. Press
year and advance to the next setting, CLOCK TYPE.
to accept the information
to change the setting.
to accept the information
to change the
to accept the selected
to accept the information
to change the
to accept the selected
First Time
Setup
01026018
13