Table of Contents
Advertisement
Sonos PLAYBAR
Close the Settings window when changes are complete.
5.
Remote control setup
During PLAYBAR setup, you were guided through the process of configuring a remote control. If you did not
configure one then, or wish to use a different remote control with your PLAYBAR, follow the steps below.
If you are configuring a new remote because a distracting message appears on the television whenever you
adjust the volume, please go to Eliminating annoying messages on your TV when using a cable, satellite,
or set top box remote, or Eliminating annoying messages on your TV when using a universal remote for
additional information.
Using the Sonos app on a mobile device
Select Room Settings from Settings.
1.
Select the room your PLAYBAR is located in.
2.
Select TV Setup and Control -> Remote Control Setup.
3.
If a remote control is already configured for use with your PLAYBAR you will be asked if you want to
replace it.
Pick up the remote control you wish to begin using with the PLAYBAR.
4.
Point the remote at the PLAYBAR and press the Volume Up button on the remote control.
5.
• If the remote control is recognized, click Done. You can now use that remote to control the volume and
mute settings on your PLAYBAR.
• If the remote control is not recognized, you will be prompted to make additional button presses to
complete the setup process.
Using the Sonos app on a Mac or PC
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
Choose the room the PLAYBAR is located in from the Room Settings for drop-down.
3.
Select the TV Setup tab.
4.
Click Remote Control Setup.
5.
Pick up the remote control you wish to begin using with the PLAYBAR, and then click Next.
6.
Point the remote at the PLAYBAR and press the Volume Up button on the remote control.
7.
• If the remote control is recognized, click Done. You can now use that remote to control the volume and
mute settings on your PLAYBAR.
• If the remote control is not recognized, you will be prompted to make additional button presses to
complete the setup process.
If a message appears on the television whenever you adjust the volume up and down, please see Eliminating
annoying messages on your TV when using a cable, satellite, or set top box remote or Eliminating
annoying messages on your TV when using a universal remote for additional information.
Recalibrating the audio
If you have a SUB and/or Sonos surround speakers associated with your PLAYBAR, you may wish to make
some adjustments after initial setup. You will likely wish to recalibrate the audio if you move any Sonos
products in the room.
If you made any manual adjustments to EQ settings, these will be reset during the recalibration process.
11
Advertisement
Table of Contents
