Program Your Remote Control - Sonos Playbar Product Manual

8

Program your remote control

During setup, you'll program your remote control.
You can program a different remote control any time.
Open the app and tap
1.
Note: You can also use the Sonos app for Mac or PC to program your remote.
Choose the room.
2.
Tap TV Setup and Control > Remote control setup.
3.
Note: Some TVs show unnecessary messages when you adjust the volume. You may be able to turn these
off. See Eliminating annoying messages on your TV when using a universal remote.
IR signal light
A light displays on the Playbar when an IR signal is being sent. If desired, you can adjust this setting so the IR
light never displays. This setting is On by default.
On a mobile device:
Go to > Settings > Room Settings.
1.
Select the room the Playbar is located in.
2.
Select TV Setup and Control > IR Signal Light.
3.
Select On or Off.
4.
On a computer:
Select Manage > Settings (PC) or Sonos > Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
Choose the room the Playbar is located in from the Room Settings drop-down list.
3.
Select the TV Setup tab.
4.
Check the IR Signal Light checkbox to turn this setting on, uncheck to turn it off.
5.
Close the Settings window when changes are complete.
6.
IR repeater
When the Playbar is placed in front of your TV on a tabletop, it may block the IR sensor on your TV. The IR
repeater setting allows the Playbar to repeat the signal to your TV. This setting is On by default.
On a mobile device:
Go to > Settings > Room Settings.
1.
Select the room the Playbar is located in.
2.
Select TV Setup and Control > IR Repeater.
3.
Select On or Off.
4.
> Settings > Room Settings.
Product Guide