Table of Contents
Advertisement
Sonos PLAYBAR
Remove the template from the wall.
4.
Drill pilot holes.
5.
Because the anchors and screws are designed to be self-starting, this step is optional. However pre-
drilling will result in a more accurate installation. Refer to the table below for more information.
Wall Material
Wood Stud
Drywall (no stud)
Hard wallboard or double
board
Plaster
Concrete or Brick
Insert and secure the wall anchors (supplied in the wall mount kit).
6.
• If you are drilling into wood stud, do not use the wall anchors.
• If you are drilling into Sheetrock, screw the wall anchors into the drywall with a Phillips head screwdriver
until the head is flat against or slightly below the wall surface, being careful not to overtighten.
Note: The anchors can be installed using a screw gun or a regular power drill with
a Phillips head screwdriver attachment. If you are drilling into sheetrock, the
surface of the drywall may distort slightly or dimple as the anchor is installed. This
is not unusual.
Pre Drill
with 1/8" (3mm) bit
with 3/16" (4.5mm) bit
with 3/16" (4.5mm) bit
with 1/4" (6.5mm) bit
with 1/8" (3mm) bit
Use Wall Anchors
No
Yes
Yes
Yes
Yes
Use Screws
Yes
Yes
Yes
Yes
Yes
23
Advertisement
Table of Contents
