Table of Contents
Advertisement
User's Guide
Note:
❏ Load a single sheet of paper without binding holes at the top and bottom.
❏ Adjust the print position of your file to avoid printing over the holes.
4. Slide the edge guides to the edges of the paper.
5. When you load thick paper or business card size paper, lower the output switch lever to output the paper to
the front of the printer.
Note:
We also recommend outputting envelopes to the front of the printer.
Note:
❏ For letterhead paper, select Letterhead as the paper type.
❏ For letterhead paper, if you print on paper that is smaller than the setting in the printer driver, the printer may print
beyond the edges of the paper which can lead to ink smears on your printouts and excess ink building up inside the
printer. Make sure you select the correct paper size setting.
❏ 2-sided printing is not available for letterhead paper. Also, the print speed may be slower.
Related Information
"Paper Handling Precautions" on page 34
&
"Available Paper and Capacities" on page 32
&
"Loading Envelopes and Precautions" on page 40
&
Preparing the Printer
39
Advertisement
Table of Contents
