Special On-Board Tools; Power Cord Storage - Bissell 3593 User Manual

Special On-Board Tools

Your vacuum is not only a powerful carpet and rug
vacuum cleaner, it's also a versatile above floor vacuum
cleaner when you select one of the special tools.
Raise Handle to Upright Position.
1.
Grasp the Quick Reach Handle and lift Hose Wand to
2.
separate from suction intake opening.
Attach tools by firmly pushing onto Vacuum Hose or
3.
Extension Wand.
Dusting Brush Tool (Select Models): Use to dust
furniture, blinds, books, lamps, shelves,
draperies, and cushions.
Dusting Brush/Upholstery Tool (Select Models): Two
types of cleaning tools in one attachment.
• Use the Dusting Brush to dust furniture, blinds, books,
lamps, shelves and baseboards.
• Slide the brush off to use the Upholstery Tool on
cushions, draperies and fabrics.
Crevice Tool: Use in tight narrow spaces.
Extension Wand: Use with desired attachment for a
longer reach.
TurboBrush (Select Models): Use rotating brush action
for small areas such as stairs and upholstery.
Note: Press gently when using the
TurboBrush to gain maximum cleaning. Too
much pressure will cause the brush to
stop rotating.
Stair Cleaning Tool (Select Models): Use for stairs, area
rugs, and other small carpeted areas. This tool can also be
used for bare floors.
All items may not be included with your model. More
tools are available; to order please refer to page 15.

Power Cord Storage

When you are done using your vacuum, return it to
the Upright position and store the Power Cord.
Turn vacuum cleaner off.
1.
Unplug Power Cord by grasping the polarized plug (NOT
2.
the cord) and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of
3.
vacuum cleaner.
Clip molded plug to Power Cord to secure.
4.
Tip:
Hair, string and small objects can block
the Vacuum Hose or Tools. Check them
occasionally for obstructions.
NOTICE:
The Floor Brush will continue
to rotate while you use your
vacuum for above floor cleaning.
To prevent carpet damage, do
not lean on the vacuum or let the
Powerfoot tilt forward.
CAUTION:
The Rotating Floor Brush
continues to rotate while tools
are in use. To reduce the risk
of injury from moving parts,
always move the cleaner with
the Carrying Handle at the
back of the cleaner. Always
place vacuum cleaner on floor
with Handle in Upright position
when using tools. Never place
your fingers under the cleaner
when it is running. Never place
Powerfoot on furniture or
uneven surfaces. Do not place
vacuum cleaner close enough
to objects to pull them into
rotating brush.
9