Step 3: Setting Up The Wireless Lan Function - Sony PEG-UX40 CLIE Handbook (primary manual) Operating Instructions Manual

Step 3: Setting up the wireless LAN function

You need to set up the wireless LAN function, referring to the settings you recorded on
the check sheet.
1
Tap (Prefs) in the CLIE 3D Launcher to start Preferences, then
tap at the top right of the screen and [Network].
The Network screen is displayed.
2
Tap [ Service:], then tap [Wireless LAN] and [Details...].
The Wireless LAN Setup screen is displayed.
3
Tap (Menu).
The menu is displayed.
4
Tap [New...] from [SSID].
The SSID Setup screen is displayed.
5
Enter the settings for the wireless LAN access point, referring to
the check sheet.
38