Sony PEG-UX40 CLIE Handbook (primary manual) Operating Instructions Manual page 17

Notes
• Do not simply copy the Palm™ Desktop for CLIÉ folder from the supplied
Installation CD-ROM to your computer. To install the software properly, follow
the installation procedure described below.
• If you use Windows 2000 Professional or Windows XP, log on with a User Name
in the Administrators group before installing the software.
• If you have more than one CLIÉ handheld and the old version of Palm™
Desktop for CLIÉ has already been installed on your computer, follow the
installation procedure below to upgrade to the new version.
* If you are using PEG-N710C Series or PEG-S300 Series, refer to your CLIÉ
handheld support website. (Refer to the URL shown on the back cover of this
manual.)
b
For details, refer to "Transferring data from another CLIÉ™ handheld" in the
supplied "Handbook".
1
Quit all applications running on Windows
2
Insert the supplied Installation CD-ROM into the CD-ROM
drive of your computer.
The Installation Launcher window is displayed.
3
Click [Install] for Palm™ Desktop for CLIÉ.
The setup program starts and the InstallShield Wizard window is
displayed.
Note
If you try to install Palm™ Desktop for CLIÉ when another version of
Palm™ Desktop for CLIÉ is already installed in your computer, a warning
message appears on your computer window.
Uninstall the old version of Palm™ Desktop for CLIÉ by using [Add/
Remove Programs] on [Control Panel] of your computer and install the new
version.
4
Click [Next].
The Select Synchronization Application window is displayed.
5
Select the software you will use to synchronize your CLIÉ
handheld with your computer.
If you select [Synchronize with Palm Desktop for CLIÉ], Intellisync Lite
will not be installed. If you select [Synchronize with Microsoft Outlook or
Lotus Organizer], both Palm™ Desktop for CLIÉ and Intellisync Lite
will be installed.
®
.
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
17