Sony CLIE PEG-TJ25 Handbook page 122

Performing the HotSync
6
Tap [OK].
The HotSync screen is displayed again.
Performing the LANSync operation
You can perform the LANSync operation when you have prepared your
computer settings, CLIÉ handheld settings, and Conduit Setup. Turn on the
computers and start HotSync
Note
To perform the LANSync operation, both the computer connected to your CLIÉ
handheld and the computer performing the HotSync
LANSync. Also, click
tray (Notification area) at the bottom right of the computer window on each computer
and make sure that [Network] in the shortcut menu is selected (If not, click [Network] to
select it).
1
Rotate the Jog Dial™ navigator to select
the CLIE Launcher, and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap
2
Tap
The HotSync
A message will be displayed when the HotSync
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
operation via LAN (LANSync)
®
Manager.
(HotSync) to display the shortcut menu in the Windows task
(HotSync) to display the HotSync screen.
(HotSync).
®
operation starts.
®
operations)
®
operation should be set for
(HotSync) on
®
operation is complete.
®
122