Table of Contents
Advertisement
Safety
Safety
This manual supports software revision 1.06.
Ensure that this Technical Manual is read and understand BEFORE installing/operating/
maintaining the equipment.
Pay particular attention to Warnings and Cautions.
All document Warnings are listed here and repeated where appropriate at the start of the
relevant chapter(s) of this Technical Manual. Cautions appear in the sections/sub-sections of the
document where they apply.
WARNINGS
Touchpoint 1 is designed for installation and use in indoor safe area
non-explosive atmospheres. Installation must be in accordance
with the recognized standards of the
appropriate authority in the country concerned.
Before carrying out any work ensure local regulations and site procedures
are followed.
Access to the interior of the controller, when carrying out any work, must only be
conducted by trained personnel. Switch off and isolate the power supply
to the controller, or obtain a hot work permit, when access is required. Take any
necessary precautions to prevent false alarms.
The detectors/sensors that the controller connects to may be used for gas
detection in hazardous atmospheres. Refer to the individual detector/sensor
instructions for their details.
TP1MAN Issue 3 Apr 06 (MAN0630)
3
Advertisement
Table of Contents
