PLACEMENT
If the drying cabinet is to be installed
connected to air exhaust ventilation,
this must be available in the room.
There must be an earthed socket
within a distance of 2 m from the
upper part of the drying cabinet.
The drying cabinet has a 2 m long
earthed lead with a plug connected.
The power socket should be located
such that there is no need for an
extension cable.
It must be possible to reach the
socket easily after the drying cabinet
has been installed.
This must also be borne in mind if
the drying cabinet is built into wood-
work or similar. See also the section
on 'Electrical connection'.
The fl oor where the cabinet is lo-
cated must withstand a weight of
around 60 kg.
The fl oor must be level with a max
drop of 2.5 cm under the cabinet.
The drying cabinet is intended only
for installation indoors with a tem-
perature above 0°C.
The drying cabinet must not be
placed in an environment in which
high-pressure water is used for
cleaning.
595
298
A
635
Cabinet desig-
nation
DC7774V
DC7784V
100
608
Dimensions in mm
A mm
1700
1840
9