Installation Checklist - Siemens MK8000 Quick Reference Manual

3.3

Installation checklist

















i
DMS-CG – DMS Configuration Guide (EDMS no. – 007083)
1
Building Technologies
Fire Safety & Security Products
The following two checklists tell you what you need for MK8000 installation, and
the steps you go through to install it. Make a mark in the corresponding checkbox
as you satisfy each item.
ITEMS NEEDED FOR INSTALLATION
The following list outlines information and items needed to install MK8000
Administrator logon ID and password
All networked PCs configured into the same workgroup or domain
Station names and IP address of all PCs
Hardware key (Dongle)
PAK (Product Activation Key) license codes for MK8000 and Composer
DMS8000 MP4.10 Installation CD
Please note that if you are migrating from an existing MK8000 to a newer version, you
should refer to the Release Notes prior to performing the installation procedure.
The following steps outline what you need to do to install MK8000:
1. Log on as Administrator.
2. On the main (Stand-Alone) station, install the required application software:
- MSDE 2000 software
(after installing MSDE, reboot and check that SQL Server is running)
Or
SQL Express 2005 and SQL 2005 Backward Compatibility software.... See p. 24
- SQL XML 3.0 software
- Microsoft .NET Framework 1.1 software
- Microsoft .NET Framework 2.0 software
3. Install MK8000 software on the Stand-Alone station
4. Connect and activate the hardware key
5. Install MK8000 software on the FEP and Client
6. Test the connections of the OPC server
Expert users may simply follow the checklist above and possibly refer to the detailed
sections indicated for each item. Instead, new users are recommended to read
through the sections that follow.
048_DMS_MK8000_ICC_MP4.10_A6V10062407_a_en.doc
Installation
:
See p. 24
See p. 24
See p. 25
See p. 26
See p. 30
1
See DMS-CG
See p. 32
See p. 32
21
06.2007