Installation Checklist - Siemens MK8000 MP4.30 Installation/Configuration Manual

3.3

Installation checklist



















1
DMS-CG: DMS8000 Network, Fire, and Intrusion Configuration Guide (document no.AV1062425)
Building Technologies
Fire Safety & Security Products
The following checklists tell you what you need for MK8000 installation, and the
steps you go through to install it.
ITEMS NEEDED FOR INSTALLATION
The following list outlines information and items needed to install MK8000:
Administrator account name and password is required.
In case of a distributed system, all PCs should be in the network and configured
into the same domain.
Network names of all the PCs to install must be known.
The hardware key (dongle) is needed, which can be designed for parallel or USB
port installation.
A license PAK associated to the hardware key is always required.
Installation CD: MK8000 is distributed on a CD that includes all the necessary
software and an installation guide.
If SiPass is required on the same server, SiPass server software must be in-
stalled before MK8000.
If required, video application software (e.g. for SISTORE DVR) should preferably
be already installed.
If required, OPC servers should preferably be already installed.
SQL server is required locally or on the network. If an external SQL server is
used, make sure to have the server name and the authentication password. If
SiPass is also used, then the SQL Server is provided by SiPass.
If you are migrating from an existing system to a newer version, you should refer
to the Release Notes prior to performing the installation procedure.
INSTALLATION PROCEDURE
The following steps outline what you need to do to install MK8000:
1. Log on as Administrator.
2. Disable or reconfigure the Windows firewall
3. Uninstall any existing versions of MK8000
4. Check the software requirements (see 3.1.2 at p.10), with special attention to:
MSDE 2000 (or SQL Express 2005 and SQL Backward Compatibility)
–
NET Framework1.1 and 2.0, SQLXML 3.0
–
Video and SiPass Access Control applications
–
5. Install MK8000 software on the Stand-Alone station
6. Connect and activate the hardware key
1
CG
5. Install MK8000 software on the FEP and Client
6. Test the connections of the OPC server
Expert users may simply follow the checklist above and possibly refer to the de-
tailed sections indicated for each item. Instead, new users are recommended to
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
Installation
p. 12
p. 33
See DMS-
p. 38
p. 39
19
06.2010