Adding A Track Mark - Sony Net MD Walkman MZ-N505 Operating Instructions Manual

2
While playing a track within a group
whose order you want to change,
press MENU (EDIT for 2 seconds or
more).
3
Press . or > (flip the lever
towards > or .) repeatedly
until "EDIT" flashes in the display,
and then press ENTER (ENTER).
4
Press . or > (flip the lever
towards > or .) repeatedly
until "G:Move" flashes in the display,
and then press ENTER (ENTER).
You can now move the selected
group.
5
Press . or > (flip the lever
towards > or .) repeatedly to
select the destination point on the
disc, and then press ENTER
(ENTER).
To cancel moving
Press CANCEL (T MARK) in step 5.

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track. The track numbers will
increase as follows:
You cannot add a track mark on a track
that has been checked-out from your
computer.
1
Add a track mark
1 2
Track numbers increase
44
-GB
2 3 4
3 4 5
T MARK
1
While playing or pausing an MD,
press T MARK (T MARK) at the
point you want to mark.
"MK ON" appears in the display, and
a track mark is added. The track
number will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK (T MARK) at the point
you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 30).
T MARK