Table of Contents
Advertisement
Manual Accuracy
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings, and
photographs of the machine we used when writ-
ing this manual. However, sometimes errors do
happen and we apologize for them.
Also, owing to our policy of continuous improve-
ment, your machine may not exactly match
the manual. If you find this to be the case, and
the difference between the manual and machine
leaves you in doubt, immediately call our techni-
cal support for updates or clarification.
For your convenience, we always keep current
Grizzly manuals and most updates available on
our website at www.grizzly.com. Any updates to
your machine will be reflected in these documents
as soon as they are complete. Visit our site often
to check for the latest updates!
Contact Info
We stand behind our machines. If you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
If you have any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
/
Technical Documentation Manager
C
O
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
-2-
INTRODUCTION
Functional Overview
This machine is designed to remove the top sur-
face of a workpiece then sand it smooth so it is
ready for finish spraying or other uses.
In a typical operation, the operator sets the depth
of cut, turns the sanding drum and feed motors
ON, sets the speed of the feed belt, then feeds
the workpiece into the machine.
The feed belt moves the workpiece under the
cutterhead and sanding drum, then out the other
side. The workpiece can be fed through additional
times until the desired thickness and finish are
achieved.
The oscillation system shifts the sanding belt
from side-to-side on the sanding drum to produce
an even sanding finish across the width of the
workpiece. The sanding motor brake unit brings
the cutterhead and sanding belt to a quick stop
when the power is turned OFF.
G0677 24" Planer/Sander
Advertisement
Table of Contents
