Installation, Operation and Maintenance Manual
RGS011110-1 Rev. 0
13.
Figure 19
14.
Maintenance
Place shaft shoulder washer on top of bushing and insert shaft through top of
shaft hole (shaft shoulder washers not applicable for 203, 204, and 205 models).
Insert second shaft shoulder washer on top of shaft, followed by bushing
(already containing both O-rings) again with external O-ring closer to the center
of the body of the actuator (shaft shoulder washers not applicable to 203, 204,
and 205 models).
Section 4: Maintenance
November 2015
18