Scan Tuning - Sony ICF-SW07 Marketing Operating Instructions Manual

Various ways of reception (continued)

Scan tuning

FM/AM
AM BAND
1
Press POWER ON/OFF to turn on the radio.
2
Press FM/AM to select either band.
To listen to SW, MW or LW broadcasts, select AM.
3
For AM bands, hold down AM BAND and press – 1¿
or ÷1 + to select MW (medium wave), LW (long wave)
or a meter band (short wave).
The name of the band or the meter band and its lowest frequency
appear in the display.
For FM, skip this step.
4
Hold down – 1¿ or ÷1 + . Release when the unit starts
scanning.
"SCAN" is displayed. The unit stops at each reception and
resumes scanning after about 3 seconds.
The unit scans within the frequency
range of the chosen band or meter
band (see "Frequency range of the
bands/meter bands", page 19). In the
SSB reception mode, the unit scans the
whole 150 to 29999 kHz frequency range.
5
Press – 1¿ or ÷1 + to stop scanning and listen to the
desired broadcast.
"SCAN" disappears and the name of the band appears in the
display.
GB
20
Listening to the radio
ABC DEF GHI
1 2
FM/
AM
JKL MNO PQR
4 5
AM BAND
STU VWX YZ
LOCAL/ 7 8
WORLD
<>
/ DISPLAY
LABEL EDIT
0
DIRECT EXE
TIMERSTANDBY/ TIME SET
STANDBY TIME SET TIME DIFF
a b
STANDBY MEMORY
SW STATION CALL
MY DW VOA
POWER
ON/
3
SYNC
OFF
6 SSB SLEEP
DST
9
ERASE
LIGHT
TIME SET
ENTER
JOG/
TUNE/
SCAN˚
BBC OTH
POWER
ON/OFF
– |¿/÷| +