30Xa 1112, 1212, 1312, 1382 Mche Heat Exchanger (Standard) And 30Xa 1112, 1212, 1312, 1382 Cu/Al Heat Exchanger (Option 254/255) - Carrier Aquaforce 30XA302 Installation, Operation And Maintenance Instructions

3.7 - 30XA 1112, 1212, 1312, 1382 MCHE heat exchanger (standard) and 30XA 1112, 1212, 1312, 1382 Cu/Al
heat exchanger (option 254/255)
419
2253
1500
Legend
All dimensions are given in mm.
Required clearances for maintenance (see note)
Recommended space for evaporator tube removal
3
Required clearances for maintenance if options 100A + 107 are used together
Water inlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certified drawing.
Water outlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certified drawing.
Air outlet – do not obstruct
Power supply and control connection
Control circuit connection for option 158
C
1
c
11962
1
3
1
NOTES:
- Drawings are not contractually binding.
- Before designing an installation, consult the certified
dimensional drawings, available on request.
- For the positioning of the fixing points, weight
distribution and centre of gravity coordinates please
refer to the dimensional drawings.
- If the installation includes several units or if this
(these) is (are) close to walls, please refer to chapters
3.12 - "Multiple chiller installation" and 3.13 -
"Distance to the wall" of this document to determine
the space required.
419
1500
1
2
13