Using The Group Function - Sony MZ-R910 Operating Instructions Manual

On the remote control
1
Press X while playing a disc.
2
Turn and hold the control until the
desired track number or track name
appears in the display.
3
Press X to cancel the pause.
Playback starts from the selected track.
Searching for a specific point
while monitoring the elapsed
time (Time Search)
To do a time search, set the search mode to
"Time" in advance (page 13).
On the recorder
1
Press X while playing a disc.
2
Keep pressing . or > until the
desired point appears in the display.
3
Press X to cancel the pause.
Playback starts from the selected point.
On the remote control
1
Press X while playing a disc.
2
Turn and hold the control until the
desired point appears in the display.
3
Press X to cancel the pause.
Playback starts from the selected point.

Using the group function

(Group Mode)
See the illustrations in English text (pages 36 to
37).
The recorder can operate various playback with
a disc which has group setting.
Listening to tracks in a specific
group (Group Mode Playback)
• Insert a disc with group settings.
On the recorder
1
Start playback.
14
2
Press GROUP for 2 seconds or more to
turn the group mode on.
Playback stops at the end of the last
track in the selected group.
For details on selecting another group,
see "Selecting and playing groups
(Group Skip Mode)" (page 14).
On the remote control
1
Start playback.
2
Press DISPLAY for 2 seconds or more.
3
Turn the control repeatedly until
"GROUP" flashes in the display, and
then press x to enter.
4
Turn the control repeatedly until
"GROUP ON" flashes in the display,
and then press x to turn the group mode
on.
To turn off the group function
• On the recorder
Press GROUP for 2 seconds or more again.
• On the remote control
Select "GROUP OFF" in step
Note
In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated in
the display window on the recorder as "Group –
–." Within a group, the tracks appear in their
order on the disc, not their order within the
group.
Selecting and playing groups
(Group Skip Mode)
Operations are possible regardless of whether
group mode is on or off. However, playback on
the recorder will differ, depending on whether
group mode is on or off.
• When group mode is on:
Playback starts from the first track of the
selected group and ends with the last track
in the group.
• When group mode is off:
Playback starts from the first track of the
selected group and ends with the last track
on the disc.
• The following procedure is used when
group mode is on.
• Insert a disc with group settings.
.
4