Applying A License File To A Wireless Controller - Avaya WLAN 8100 Quick Start Manual

Completing preliminary controller configuration
Status : Enabled
Interface IP : 20.20.20.45
TCP/UDP base port : 61000
Base MAC Address : 00:24:B5:1F:9F:00
WCP8180#
12. Configure the controller to be Mobility Domain Controller (MDC) capable.
WCP8180(config-wireless)#controller mdc-capable
% Domain password should be between 10-15 characters long.
% Password must contain a minimum of 2 upper, 2 lowercase letters
% 2 numbers and 2 special characters like !@#$%^&*()
Enter domain password: **********
Verify Domain password: **********
WCP8180(config-wireless)#
Verify that the controller is MDC-capable.
WCP8180#show wireless controller info
MDC-Capable : Enabled
WCP8180#
The WC 8180 is now provisioned for wireless services and to act as a wireless control point
(WCP) in the mobility domain.
13. Create a mobility domain and join the controller with the mobility domain.
In this example, you create a mobility domain named AVAYA.
WCP8180#wireless controller join-domain domain-name AVAYA mdc-address 20.20.20.45
Enter Domain Secret: *****
Use 'show wireless controller domain-membership' to see join status.
WC8180#show wireless controller domain-membership
Domain Name
Domain Role
Domain Action Status
Action Failure Reason
WCP8180#
Next steps
Continue configuration using one of the following interfaces:
• CLI: See Configuring the Wireless Controller — using the CLI
• WLAN Management System (WMS): See
WMS on page 50
• Enterprise Device Manager (EDM): See
EDM on page 76
Related Links

Applying a license file to a wireless controller

Applying a license file to a wireless controller
Use this procedure to apply a license file to the Wireless Controller (WC) 8180.
Quick Start Overlay Deployment Configuration for Avaya WLAN 8100
18
: AVAYA
: Active MDC
: Join Success
: None
Configuring the Wireless Controller — using the
Configuring the Wireless Controller — using the
on page 18
Comments? infodev@avaya.com
on page 21
June 2014