Variable Definitions; Uninstalling The Wlan Management System (Wms) Software - Avaya WLAN 8100 Quick Start Manual

Sample output:
-rwxrwxrwx 1 root root 200470938 Sep 25 03:07 WLAN8100_WMS_<latest software
build>_Linux.bin
3. Run the installer executable. At the prompt, enter:
./WLAN8100_WMS_<latest software build>_Linux.bin
Sample output:
#./WLAN8100_WMS_<latest software build>_Linux.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Related Links
Installing the WLAN Management System software

Variable definitions

Variable definitions
Variable
<latest software build>
Related Links
Launching the WMS Installer on a Linux platform
Uninstalling the WLAN Management System (WMS)
software
Use this procedure to uninstall WMS on Windows or Linux platforms.
Note:
Uninstalling the WMS removes only those features installed by the WMS installer. It does not
remove the files and folders that you create after installation.
Procedure
1. Launch the WMS installer to being uninstallation.
• On Linux:
- Navigate to the uninstall folder at the location of installation of WMS on your computer.
June 2014
on page 115
Value
Defines latest WMS software build number.
Quick Start Overlay Deployment Configuration for Avaya WLAN 8100
Comments? infodev@avaya.com

Uninstalling the WLAN Management System (WMS) software

on page 110
on page 114
115