Launching The Wms Installer On A Linux Platform - Avaya WLAN 8100 Quick Start Manual

Installing the WLAN Management System software
Perform the following steps to restore data:
a. Enable Restore Database to restore the database. Click Choose... to navigate to the
path of the back up file.
If required, click Restore Default to restore the path to the default location.
b. Enable Restore SMX Files to restore the backed up .smx files. Click Choose... to
navigate to the path of the back up file.
SMX files are site model files that typically capture the physical properties and layout of
each floor in a building where the WLAN solution is deployed.
If required, click Restore Default to restore the path to the default location.
13. Click Next to proceed with the install.
Wait for the Install Complete screen to appear. Review the installation status message to
ensure that the installation is successful.
14. Click Done.
You can now launch the WMS using your web browser.
15. Verify that the WMS is installed successfully.
a. Verify that the license file is restored. In the WMS browser, the bottom bar should
display the number of licenses installed as Licensed to monitor [xx] APs.
b. If Site View is configured, verify that the .smx files are restored. Click Monitoring, Site
Views, Site Model. Highlight the .smx file to be activated, then click Activate.
Related Links

Launching the WMS Installer on a Linux platform

Uninstalling the WLAN Management System (WMS) software
Launching the WMS Installer on a Linux platform
Before you begin
Ensure that the latest WMS installer executable is at the location /opt/Avaya/WMS on your
computer. For the latest software build information, refer to Release Notes for Avaya WLAN 8100,
NN47251-400.
Procedure
1. Navigate to the location of the WMS installer executable <latest software build>.
2. Set execute permissions on the installer executable file. At the prompt, enter:
chmod 777 WLAN8100_<latest software build>.bin
To verify permissions, enter:
ls -l WLAN8100_WMS_<latest software build>_Linux.bin
Quick Start Overlay Deployment Configuration for Avaya WLAN 8100
114
on page 114
Comments? infodev@avaya.com
on page 115
June 2014