To Fill The Tank-In-Tank; Getting Ready; Measuring Cup - Bissell 1693 Series User Manual

Assembly
Your PowerSteamer assembles in two quick steps. The only
tool you will need to assemble your cleaner is a Phillips
head screwdriver.
Your PowerSteamer is packaged as two primary components...
the Lower Body and the Handle Assembly. To assemble:
Slide the Handle Assembly (with attached Quick Release Cord
1.
Wrap™) down into the Lower Body until it will go
no further.
Secure the handle by placing one (1) Phillips head
2.
(supplied) through the screw opening in the Lower Body and
into the rear of the Handle Assembly. Tighten with screwdriver
until secure.
Assembly is now complete.
The Basics: How Your PowerSteamer Works
Your PowerSteamer is a home cleaning system that uses a
combination of hot tap water, BISSELL advanced deep cleaning
formula and suction to safely clean carpets and upholstery.

Getting Ready

The Power Switch controls power to the machine.

Measuring Cup

Your PowerSteamer is equipped with a Measuring Cup for
adding the proper amount of cleaning formula to the
Tank-in-Tank™. Before using the machine, simply fill the
Measuring Cup to the fill line with BISSELL Advanced Deep
Cleaning Formula. Pour the formula into the Tank-in-Tank
as shown on page 6. For convenience, the Measuring Cup
stores on the back of the unit.

To Fill The Tank-in-Tank

This easy-to-use system is designed with a bladder inside
to hold clean water. As you clean, the bladder will empty.
Dirty water collects in the tank outside
the bladder.
NOTE: Make sure to add formula to the tank before filling
it with water.
Depress the Handle Release pedal to tilt back
1.
the handle.
screw
ON
Power
Switch
Tip:
Deep cleaning
carpeting and
upholstery regularly
can reduce dust and
allergens in your
home.
WARNING:
To reduce the risk
of fire, electric
shock or injury
unplug from outlet
before servicing.
1
Phillips
Head
Screw
Tilt Handle
Back
Handle Release
5