Troubleshooting; Please Do Not Return This Product To The Store - Bissell 1693 Series User Manual

Troubleshooting

Reduced Spray Or No Spray.
Possible Causes
Bladder may be empty
1
The lint screen may be clogged
2
Tank-in-Tank may not be seated properly
3
Pump may have lost prime
4
The Pump Belt may be broken
5
PowerSteamer is not picking up solution.
Possible Causes
Nozzle Window may not be properly attached
1
Tank-in-Tank Lid is not properly installed
2
Tank-in-Tank is not properly seated
3
Tank-in-Tank has picked up the maximum
4
ReadyTools Dial may be at the
5
wrong setting for cleaning job.
Poor tool position.
6
(Handheld attachments only.)
If you should happen to need assistance during assembly or operations, call 1-800-263-2535.

Please do not return this product to the store

10
Thank you for selecting a BISSELL product.
WARNING:
To reduce the risk of
fire, electric shock
or injury, unplug
appliance from outlet
before servicing.
Remedies
Turn power OFF, refill tank with
1
hot tap water.
Turn power OFF, clean out lint
2
screen, follow step 2 on page 6.
Turn power OFF; remove and
3
reseat tank
Turn power OFF; after 1 minute, turn
4
ON and depress Spray trigger.
See page 9 for directions on
5
replacing Belt.
Remedies
Make sure the two tabs on the back
1
of the Floor Nozzle Window are
inserted through the mating slots in
the main housing. Reinstall
if necessary.
Reinstall lid; refer to page 6.
2
Tank-in-Tank must be firmly seated
3
to function. Remove and reseat
Tank-in-Tank.
Empty tank and refill; refer to
4
page 6.
Set ReadyTools Dial to either FLOOR
5
CLEANING or TOOLS/PRETREAT.
Readjust angle; apply more
6
downward pressure.