Sony MINIDISC MDS-JB920 Operating Instructions Manual page 47

Labeling tracks and MDs with the remote Z
EJECT
6
MENU/NO YES
DISPLAY SCROLL TIME D.O BIT
PLAY MODE
CONTINUE SHUFFLE PROGRAM RECORDED
A B C D
1 2 3
F G H I
6 7 8
K L M N
11 12 13 14
P Q R S
16 17 18 19
U V W X
21 22 23 24
Z – .
REPEAT A˜B A.SPACE
>
/ 25 ? ! (
NAME WRITE CLEAR
NAME CHAR NUM
· P
CHAR
= + r
0/) T.REC
0 )
CD-SYNC
STOP START STANDBY
CD PLAYER FADER
P = +
1
Press NAME repeatedly until a flashing cursor
appears in the display, then do the following:
To label Make sure that the deck is
A track Playing, pausing, recording the
track to be labeled, or stopped after
locating the track to be labeled
An MD Stopped with no track number
appearing in the display
2
Select the character type as follows:
To select Press
Uppercase letters CHAR repeatedly until "Selected
AB" appears in the display
Lowercase letters CHAR repeatedly until "Selected
ab" appears in the display
Numbers NUM repeatedly until "Selected
12" appears in the display
3
Press an alphabet/number button to enter a
character.
After you enter a character, the cursor shifts
rightward and waits for the input of the next
character.
You can change the character type at any time
during Step 3 (see Step 2).
MENU/NO
DATE
PRESENT
E
4 5
J
9 10
O
Alphabet/number
15
T
buttons
20
Y
25
,
M.SCAN
)
P.HOLD
CLEAR
p
NUM
REC-IT
MUSIC SYNC
Editing Recorded MDs
4
Repeat Step 3 until you have entered the entire
title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing.
Press CLEAR to erase the incorrect character, then
enter the correct one.
5
Press NAME again.
This completes the labeling procedure and the title
appears in the display.
To cancel labeling
Press MENU/NO or p.
Changing an existing title Z
1
Press NAME, then do the following:
To change Make sure that the deck is
A track title Playing, pausing the track whose
title is to be changed, or stopped
after locating the track whose title
is to be changed
A disc name Stopped with no track number
appearing in the display
2
Hold down CLEAR until the current title is
erased.
3
Enter the new title.
Do Steps 6 to 9 of "Labeling Recordings" on pages
45 and 46, or Steps 2 to 4 of "Labeling tracks and
MDs with the remote" on this page.
4
Press NAME.
(Continued)
47 EN