Fading In And Out (Fader) - Sony MINIDISC MDS-JB920 Operating Instructions Manual

Recording on MDs

Fading In and Out (Fader)

You can gradually increase the recording level at the
beginning of a recording (fade-in recording) or
gradually decrease the recording level at the end of a
recording (fade-out recording).
This function is convenient when, for example, you
don't want the track cut off abruptly when the disc
reaches to its end.
FADER
Fade-in recording
During recording pause, press FADER at the position
where you want to start fade-in recording.
Z in "Fade Z 3.2s" flashes and the deck performs the
fade-in recording until the counter reaches "0.0s".
Fade-out recording
During recording, press FADER at the position where
you want to start fade-out recording.
z in "Fade z 3.2s" flashes and the deck performs the
fade-out recording until the counter reaches "0.0s".
The deck changes to recording pause when fade-out
recording finishes.
20 EN
REPEAT A˜B A.SPACE M.SCAN
>
/ 25 ? ! ( )
WRITE CLEAR P.HOLD
NAME CHAR NUM
·
P p
REC-IT
= + r
T.REC MUSIC SYNC
0 )
CD-SYNC
STOP START STANDBY
CD PLAYER FADER
P = +
DIGITAL REC LEVEL
FADER
/ANALOG OUT LEVEL
z
You can set the duration of fade-in and fade-out
recording independently
1 While the deck is stopped, press MENU/NO twice to
display "Setup Menu".
2 To set the duration of fade-in recording:
Turn AMS to select "Setup 08", then press AMS.
To set the duration of fade-out recording:
Turn AMS to select "Setup 09", then press AMS.
3 Turn AMS to set the duration.
Both the fade-in and fade-out recording durations can
be set in 0.1 second steps.
4 After selecting the duration, press AMS.
5 Press MENU/NO.