Table of Contents
Advertisement
Naming a track or MD (continued)
3
Turn AMS until "Nm In ?" appears, then
press AMS or YES.
While the deck is recording, a flashing
cursor appears in the display and you can
enter a name for the track being recorded. In
this case, go to step 5.
4
Turn AMS until the track number (when
naming a track) or "Disc" (when naming
the MD) flashes, then press AMS or
YES.
A flashing cursor appears.
The deck starts playing and you can name a
track while monitoring the sound.
5
Press LEVEL/DISPLAY/CHAR
repeatedly to select the character type.
Each time you press the button, the display
changes cyclically as follows:
(Blank space) t A (Upper cases) t a
(Lower cases) t 0 (Numbers) t '
(Symbols)
To enter a space
Press M while the cursor is flashing. You
cannot enter a space as the first character.
6
Turn AMS to select the character.
The selected character flashes.
To enter a symbol
You can use the following symbols in titles:
' – / , . ( ) : ! ? & + < > _ = " ; # $ % @ * `
To change a selected character
Repeat steps 5 and 6.
7
Press AMS.
The selected character is entered and lights
continuously. The cursor shifts to the right,
flashes, and waits for the input of the next
character.
24
8
Repeat steps 5 to 7 to enter the rest of
the name.
To change a character
Press m/M repeatedly until the character
to be changed flashes, then repeat steps 5 to
7.
To erase a character
Press m/M repeatedly until the character
to be erased flashes, then press CLEAR.
9
Press YES.
The whole name appears in the display,
followed by "Complete!!".
Naming a track or an MD
using the remote
1
Press NAME EDIT/SELECT while the
deck is in one of the operating modes
listed below, depending on what you
want to name:
To name
Press while
A track
The track number displayed
The MD
The deck is stopped with total
number of tracks displayed
A flashing cursor appears in the display.
2
Press NAME EDIT/SELECT repeatedly
to select the character type.
Each time you press the button, the display
changes cyclically as follows:
(Blank space) t "Selected ABC"
(Upper cases or symbols
abc" (Lower cases or symbols
"Selected 123" (Numbers)
1) Only ' – / , . ( ) : ! ? can be selected.
1)
) t "Selected
1)
) t
Hide quick links:
Advertisement
Table of Contents
