Step 3: Charging The Battery Pack - Sony HVR-Z7E/Z7P Operating Manual

Step 3: Charging the battery pack

You can charge the "InfoLITHIUM"
battery pack (L series) with the
supplied AC Adaptor/Charger.
b Notes
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (L series)
(p. 120).
2
4 4
Charge lamp
1
Set the mode change switch to
CHARGE.
2
Connect the mains lead to the AC
Adaptor/Charger.
3
Connect the mains lead to the
wall socket.
4
Place the battery pack in the slot
of the AC Adaptor/Charger, press
it down, and slide it in the
direction of the arrow as
illustrated.
The charge lamp turns on and charging
starts.
14
3
1
After charging the battery
All segments of the battery mark (
appear in the display window when the
normal charge of the battery is completed.
You can fully charge the battery pack if you
continue charging the battery pack after the
charge lamp turns off until the battery mark
with "FULL" appears (full charge). The
battery life of the fully charged battery is
slightly longer than that of the normally
charged battery.
Remove the battery pack from the AC
Adaptor/Charger when the charge is
completed.
z Tips
• You can check the remaining battery life with
the battery info function (p. 54).
To attach the battery pack
Press the battery pack against the back of
your camcorder and slide it down.
)