Sony UWP-C1/C2 Operating Instructions Manual page 21

Hand-held microphone
(UTX-H1)
1
Turn the grip in the direction of
the arrow to open the battery
compartment.
2
Align two new LR6 (size AA)
alkaline batteries with the polarity
markings and insert them into the
battery compartment.
Battery indication
When you turn the power on, the battery condition is shown by the BATT
indication in the display section.
When the indication in column 4 starts to flash, replace the batteries with new
ones. Be sure to check the expiration date printed on the new batteries before
using them.
BATT indication
Battery status
1 2
Lights Lights
Good Less than
50% charged
3
Turn the grip in the direction
opposite to the arrow in step 1 to
close the battery compartment.
Note
If you open the battery compartment
during signal transmission, the noise
may occur. Be sure to turn the
microphone off before opening the
battery compartment.
3
Lights
Less than
20% charged
4
Flashes
Almost
drained
21