Table of Contents
Advertisement
UM-HV1-13-11
6. OPERATING INSTRUCTIONS
6.1. TPMS TOOL OVERVIEW
Read and diagnose sensors.
Service Procedure
Read Sensor Test
Before
servicing
TPMS TOOL, trigger each of the vehicle's sensors to
make sure they are working properly.
This will eliminate the liability associated with
replacing previously damaged or defective sensors.
This procedure will not change the vehicle settings because the vehicle has yet to be put
into learn/retraining mode. This procedure allows you to quickly identify damaged or
defective sensors, because some vehicles do not report a damaged or defective sensor
condition on the instrument cluster for up to 20 minutes.
Note: If the sensors do not trigger, please refer to the Troubleshooting section of this Guide.
Perform tire/wheel service.
Begin by triggering the driver's left front (LF) wheel sensor.
The same procedure should be followed on all wheel sensors, in a
clockwise rotation.
We recommend you trigger each wheel sensor, one final time, to
make sure they are working correctly prior to releasing the vehicle to
the customer.
Page 7/32
the
tires/wheels,
using
your
VDO TPMS GO user guide
MAIN MENU
CHECK SENSOR
1 Start LF
4 End LR
Fig. 5
RF 2
RR 3
Advertisement
Table of Contents
