Listening With A Stereo System - Sony NT-2 Operating Instructions Manual

Listening with a stereo system

Connect another piece of audio equipment such as a stereo system.
1
Connect the line cable (supplied) to the LINE OUT jack of the
recorder, and then connect the other side of the cable to the
LINE IN jack of your stereo system.
2
Insert the tape with the side you want to listen to facing the
cassette holder.
3
Select DIR MODE (direction mode).
A : To play only one side.
a : To play both sides continuously*.
* The recorder plays three times continuously and then automatically
stops for protecting the tape.
4
Press œ.
Playback starts.
5
Adjust the volume on the stereo system.
Note
• If you connect the line cable to
your stereo system before
connecting it to the recorder,
noise may be heard.
18
-EN
to LINE OUT
p
œ
a stereo system,
etc.
to LINE IN
DIR MODE
EJECT
• While the headphones are
connected to the recorder, the
playback volume from the
headphones may be lowered if
you connect a stereo system to
the recorder.