Getting Ready; How To Begin - Bissell 1200 User Manual

Getting Ready

To fill the Clean Tank:
1.
Remove the Clean Tank by lifting it straight up and
A.
then away from the unit.
Unscrew the cap at the bottom of the
B.
Clean Tank.
There are 2 ways you can fill and use the tank:
For common stains such as dirt, grime, pet, or oily stains,
2.
use the fill lines on the left side of the tank and fill with
Little Green formula (trial sizes included) and water.
For dye based stains such as coffee, fruit juices, cola and
3.
red wine, use the fill lines on the right hand side of the
unit and fill with Little Green and Oxy GEN2 formulas (trial
sizes included) and water.

How To Begin

Using the Automatic Smart System™
Your new SpotBot features an Automatic Smart System
that takes the guesswork out of spot and stain cleaning.
With the touch of a button, you can select the cleaning
cycle to use your preferred method of cleaning.
Surface Stain Cycle This cycle has been designed for
1.
stains that are on the surface of your carpeting. Typically
the stains that have just happened and have not had time
to penetrate deep into your carpet fibers. This cycle will
run for approximately 3 minutes.
Set-In Stain Cycle This will serve best on stains that
2.
have had a period of time to set-in and penetrate deep
into your carpet fibers. These are typically the most dif-
ficult stain types to remove. This cycle runs for approxi-
mately 6 minutes.
Manual / Hose By selecting this option you can clean spots
3.
and stains manually on surfaces such as upholstery, car
interiors, stairs or anyplace you have a need to clean yourself.
8
ug203-6650_1200_805.indd 8 ug203-6650_1200_805.indd 8
A.
B.
3.
2.
Tip:
Before spot cleaning with
the SpotBot's Handsfree
feature, dry vacuum the
area first.
11/1/05 11:44:28 AM 11/1/05 11:44:28 AM